■ Integrated with SPO2 probe and processing display module.
■ Can be used in: hospital, home, community medical treatment, sports healthcare, etc.
■ Can measure SPO2 and PR accurately
■ SPO2 and PR display, PR waveform and bargraph display
■ Battery voltage low indication
■ Four directions and six modes
■ Low power consumption; shut off automatically when no signal.
■ USB port, sync with PC based analysis software , for live view spo2 reading and HR on PC . data stored on PC for reviewing and reporting
■ Built-in memory, store more than 24 hours patient data.
■ Small volume(58.5(L) × 31(W) ×32(H) mm)、light，convenient tocarry
■ 1.0' double Color OLED display, resolution 128*64
■ Spo2：35～99％ Pulse Ratio：30～250BPM
■ Resolution: 1% for SPO2, 1BPM for pulse ratio
■ Accuracy: ±2% (70％～99％),
±2BPM or±2% (select larger)for pulse ratio
■ Power: 1.5V (AAA size) alkaline batteries × 2
■ Can work more than 30 hours continuously
■Interference resistance capacity against ambient light and measurement performance
at low perfusion
oximeter , manual , software CD , cable to connect pc and oximeter . two battery .
Posted by Unknown on 20th Oct 2012
I used it with my Mac. You will need Parallels or VMware fusion to run the PC software.
The PC software comes on a small CD-ROM (like 2 inches) so I had to find a computer with a CD-ROM drive that has a tray that pops open.
I copied the software to a USB stick and then connected the USB stick to my Mac to load into VMware Fusion.